Materials Hdl.

The A. J. Sackett & Sons Company

Materials Handled

In general, the Bulk-Toter will handle any dry, free-flowing bulk material with a density of from 20 to 120 pounds per cubic foot, a size of from 1/16" (1.5 mm) to 1" (25 mm), and with an abrasiveness from mild to moderate. Although higher abrasive materials can be conveyed with the Bulk-Toter, they decrease the life of the conveyor's components and void the warranty. The conveyor is well suited for corrosive materials, as the body and separator plates are made of stainless steel as a standard. An all stainless steel chain is also available.

The following is a partial list of materials successfully handled by the Bulk-Toter to date:

Material Name	Weight Per Cubic Foot	Corrosiveness	Abrasiveness
Urea, prilled	45	Mild	Non-abrasive
Urea, granular	45	Mild	Non-abrasive
MAP (Mono ammonium phosphate)	60	Mild	Non-abrasive
MOP Muriate of potash)	68	Highly	Non-abrasive
Potash	65-80	Mild	Non-abrasive
Ammonium Nitrate	45-65	Mild	Abrasive
Ammonium Sulfate	45-58	Mild	Non-abrasive
DAP (Diamonium phosphate)	55-65	Highly	Non-abrasive
Phosphate Fertilizer	55-65	Highly	Non-abrasive
Cement, Portland	94-100	No	Abrasive
Grains		No	Abrasive
Salt	85	Highly	Abrasive
Granubor	90	No	Abrasive
Borate	60	No	Non-abrasive
Soda Ash	20-35	No	Abrasive
Carbon Black	4-7	No	Non-abrasive
Lime (Ag)	66	No	Non-abrasive
Quick Lime	65	No	Non-abrasive
Coal (3/4" or less)	60	No	Abrasive

Send mail to jimc@ajsackett.com with questions or comments about this web site. Last modified: July 23, 2008

Send mail to jimc@ajsackett.com with questions or comments about this web site.
Last modified: July 23, 2008